View CPH3114_25754.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN6394
PNP/NPN Epitaxial Planar Silicon Transistors
CPH3114/CPH3214
DC/DC Converter Applications
Applications
* Relay drivers, lamp drivers, motor drivers.
Package Dimensions
unit:mm 2150A
[CPH3114/CPH3214]
0.4 3
0.6 0.2
Features
* Adoption of MBIT processes. * Large current capacitance. * Low collector-to-emitter saturation voltage. * High-speed switching. * Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). * High allowable power dissipation.
2.9
0.15
0.05
1.6 2.8
1 1.9
2
0.2
0.6
Specifications
( ) : CPH3114 Absolute Maximum Ratings at Ta = 25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg
Mounted on a ceramic board (600mm2x0.8mm)
1 : Base 2 : Emitter 3 : Collector SANYO : CPH3
Conditions
0.7 0.9
Ratings (-)15 (-)15 (-)5 (-)1.5 (-)3 (-)300 0.9 150 -55 to +150
Unit V V V A A mA W
C C
Electrical Characteristics at Ta = 25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=(-)12V, IE=0 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)100mA VCE=(-)2V, IC=(-)300mA VCB=(-)10V, f=1MHz 200 (350) 450 (17)9 Conditions Ratings min typ max (-)0.1 (-)0.1 560 MHz MHz pF Unit A A
Marking : CPH3114 : AP, CPH3214 : CP
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
70500TS (KOTO) TA-2786 No.6394-1/5
CPH3114/CPH3214
Continued from preceding page.
Parameter Symbol Conditions IC=(-)750mA, IB=(-)15mA Collector-to-Emitter Saturation Voltage VCE(sat) IC=(-)1.5mA, IB=(-)30mA Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time IC=(-)750mA, IB=(-)15mA V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO IE=(-)10A, IC=0 ton tstg tf See specified test circuit. See specified test circuit. See specified test circuit. VBE(sat) Ratings min typ (-120) 130 (-210) 240 (-)0.85 (-)15 (-)15 (-)5 (50)40 (90) 180 (15)20 max (-180) 200 (-320) 360 (-)1.2 Unit mV mV mV mV V V V V ns ns ns ns
Switching Time Test Circuit
PW=20s DC1% INPUT VR 50 RB + 220F + 470F IB1 IB2 (For PNP, the polarity is reversed.) OUTPUT
RL
VBE=-5V VCC=5V 20IB1= -20IB2= IC=750mA
--1.8
mA --4 0
1.8
50m
CPH3114
mA
--2.0
IC -- VCE
--20mA
Collector Current, IC - A
2.0
IC -- VCE
CPH3214
20
mA
A
A
Collector Current, IC - A
--50 m
--1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7
--10mA --8mA
--6mA
1.2 1.0 0.8 0.6 0.4 0.2
40
--1.4
1.4
mA
30
--1.6
1.6
10mA 8mA
--3 0
mA
6mA
4mA
--4mA
--2mA
2mA
IB=0
--0.8 --0.9 --1.0 IT01691
0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
IB=0
0.9 1.0
Collector-to-Emitter Voltage, VCE - V
--1.0 --0.9
Collector-to-Emitter Voltage, VCE - V
1.0
IT01692
IC -- VBE
CPH3114 VCE= --2V Collector Current, IC - A
IC -- VBE
CPH3214 VCE=2V
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0
Collector Current, IC - A
--0.8 --0.7 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT01693
Ta=75 C 25C --25C
0
0.2
0.4
0.6
Ta=75C 25C --25C
0.8
1.0
1.2 IT01694
Base-to-Emitter Voltage, VBE - V
Base-to-Emitter Voltage, VBE - V
No.6394-2/5
CPH3114/CPH3214
1000 7 5
hFE -- IC
CPH3114 VCE= --2V
25C
1000 7 5 3 2
hFE -- IC
25C
Ta=75C
CPH3214 VCE=2V
DC Current Gain, hFE
DC Current Gain, hFE
3 2
Ta=75
C
--25C
100 7 5 3 2
--25C
100 7 5 3 2
10 --0.01
2
3
5
Collector Current, IC - A
7 --0.1
2
3
5
7 --1.0
2
3
10 0.01
2
3
5
7
IT01695 1000
Collector Current, IC - A
0.1
2
3
5
7
1.0
2
3
IT01696
1000 7
f T -- IC
CPH3114 VCE= --2V
f T -- IC
CPH3214 VCE=2V
7
Gain-Bandwidth Product, f T - MHz
Gain-Bandwidth Product, f T - MHz
5 3 2
5 3 2
100 7 5 3 2
100 7 5 3 2
10 --0.01
2
3
5
Collector Current, IC - A
7 --0.1
2
3
5
7 --1.0
2
3
10 0.01
2
3
5
7 0.1
2
3
5
7 1.0
2
3
IT01697 100
Collector Current, IC - A
IT01698
100 7
Cob -- VCB
CPH3114 f=1MHz
Cob -- VCB
CPH3214 f=1MHz
7
Output Capacitance, Cob - pF
3 2
Output Capacitance, Cob - pF
2 3 5 7 2 3
5
5 3 2
10 7 5 3 2
10 7 5 3 2
1.0 --1.0
1.0
Collector-to-Base Voltage, VCB - V
--10
1.0
2
3
5
7
IT01699 1000
Collector-to-Base Voltage, VCB - V
10
2
3
IT01700
--1000 7
VCE(sat) -- IC
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
CPH3114 IC / IB=20
VCE(sat) -- IC
CPH3214 IC / IB=20
7 5 3 2
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
5 3 2
--100 7 5 3 2
100 7 5 3 2
C 25
Ta=
75
C
5C --2
C 25
Ta=
C 75 5C --2
--10 7 5 --0.01
10 7 5 0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
2
3
5
7 0.1
2
3
5
7 1.0
2
3
Collector Current, IC - A
IT01701
Collector Current, IC - A
IT01702
No.6394-3/5
CPH3114/CPH3214
--1000 7
VCE(sat) -- IC
CPH3114 IC / IB=50
1000 7
VCE(sat) -- IC
CPH3214 IC / IB=50
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
5 3 2
5 3 2
75
--100 7 5 3 2
C
C 25
5C
100 7 5 3 2
25
C
C 75
--2 Ta=
Ta=
C --25
--10 7 5 --0.01
10 7 5 0.01
2
3
5
Collector Current, IC - A
7 --0.1
2
3
5
7 --1.0
2
3
2
3
5
IT01703 10
Collector Current, IC - A
7 0.1
2
3
5
7 1.0
2
3
IT01704
--10 7
VBE(sat) -- IC
Base-to-Emitter Saturation Voltage, VBE (sat) - V
VBE(sat) -- IC
CPH3214 IC / IB=50
Base-to-Emitter Saturation Voltage, VBE (sat) - V
5 3 2
CPH3114 IC / IB=50
7 5 3 2
--1.0 7 5 3 2
Ta= --25C
1.0 7 5 3 2
Ta= --25C
25C
75C
25C
75C
--0.1 --0.01
2
3
5
Collector Current, IC - A
7 --0.1
2
3
5
7 --1.0
2
3
0.1 0.01
2
3
5
7
IT01705 1.4
Collector Current, IC - A
0.1
2
3
5
7
1.0
2
3
IT01706
10 7 5
ASO
CPH3114/CPH3214
0 s
PC -- Ta
CPH3114/CPH3214
Collector Current, IC - A
3 2 1.0 7 5 3 2 0.1 7 5 3 2
IC=1.5A
DC
Collector Dissipation, PC - W
ICP=3A
50
10
1.2
10
0m
10
1m
m s
1.0 0.9 0.8
0 s
s
M
ou
op era tio n
s
nte
do
na
ce
0.6
ram
ic
bo
ard
0.4
(60
Ta=25C Single pulse
Mounted on a ceramic board(600mm2x0.8mm)
0m
m2 x0
0.2 0
.8m
m)
140 160
0.01 0.1
For PNP, minus sign is omitted.
2 3 5 7
Collector-to-Emitter Voltage, VCE - V
1.0
2
3
5
7
10
2
3
0
20
IT01707
Ambient Temperature, Ta - C
40
60
80
100
120
IT01708
No.6394-4/5
CPH3114/CPH3214
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of July, 2000. Specifications and information herein are subject to change without notice.
PS No.6394-5/5

▲Up To Search▲

Price & Availability of CPH3114

	To Download CPH3114 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .